English
Home > Products > Clamp-on Antenna Base for Boats

China Clamp-on Antenna Base for Boats Manufacturers, Suppliers, Factory

We have been proud from the higher consumer gratification and wide acceptance due to our persistent pursuit of high quality both on product or service and service for Clamp-on Antenna Base for Boats,Stainless Steel Clamp-on Antenna Base,Marine Grade Antenna Base,Boat Antenna Base,Stainless Steel Antenna Base, With the eternal goal of "continuous quality improvement, customer satisfaction", we are sure that our product quality is stable and reliable and our products are best-selling at home and abroad.
Clamp-on Antenna Base for Boats, We attained ISO9001 which provides solid foundation for our further development. Persisting in "High quality, Prompt Delivery, Competitive Price", now we have established long-term cooperation with clients from both overseas and domestically and get new and old clients' high comments. It is our great honor to meet your demands. We have been sincerely expecting your attention.

Related Products

Hot Products

  • 316 Stainless Steel Marine Flush Lift Ring

    316 Stainless Steel Marine Flush Lift Ring

    Material: AISI 316 marine grade stainless steel
    Surface: Mirror polished
    Application: Ship, Yacht, Boat accessories, Marine hardware, Sailing accessories

    - Made of 316 stainless steel, anti-corrosion, can be used indoor, outdoor or even in humid environment, can be used for a long time in the saltwater environment.
    - Perfectly embed the handle on the door surface, saving space and preventing bumps.
    - Using exquisite polishing process, the surface is smooth and burr-free.
  • 316 Stainless Steel 360‑Degree Rotatable Quick Release Deck Hinge

    316 Stainless Steel 360‑Degree Rotatable Quick Release Deck Hinge

    Material: Marine 316 grade stainless steel
    Surface: Mirror polished
    Application: Ship, Yacht, Boat accessories, Marine hardware, Sailing accessories

    - Made of heavy‑duty 316 stainless steel hinges, it has strong corrosion resistance and long‑lasting beauty.
    - Highly polished surface has a mirror‑like appearance, matching with boats and yachts.
    - Easily remove or install top without having to keep track of screws and pins.
    - Swivel allows deck hinge to be mounted on almost any angle. 
    - Resistance and durability in the saltwater environment.
  • 316 Stainless Steel Marine Casting Hinge With Stud

    316 Stainless Steel Marine Casting Hinge With Stud

    Material: AISI 316 marine grade stainless steel
    Surface: Mirror polished
    Application: Ship, Yacht, Boat accessories, Marine hardware, Sailing accessories

    - Made of precision cast 316 marine grade stainless steel, strong and durable, not easy to rust.
    - Maximum corrosion resistance and durability in the saltwater environment.
    - Using fine grinding mirror polishing, the accuracy, polishing degree, brightness, flatness, etc. are better, and each spacing of the product is uniformly polished.
  • Boat Mooring Bollard 316 Stainless Steel Dock Bollard Claw Bollard

    Boat Mooring Bollard 316 Stainless Steel Dock Bollard Claw Bollard

    As the professional manufacturer, ANDY MARINE would like to provide you Boat Mooring Bollard 316 Stainless Steel Dock Bollard Claw Bollard. And we will offer you the best after-sale service and timely delivery. Buy Bollard Claw Bollard which is of high quality directly with low price. We are a professional Boat Mooring Bollard 316 Stainless Steel Dock Bollard Claw Bollard manufacture for more than 35 years. Single cross bollard is commonly used on boats, yachts and docks to hold ropes. We can provide high quality products and competitive prices, and we can be good partners.
  • 316 Stainless Steel Marine Flagpole Base

    316 Stainless Steel Marine Flagpole Base

    Material: AISI 316 marine grade stainless steel
    Surface: Mirror polished
    Application: Ship, Yacht, Boat accessories, Marine hardware, Sailing accessories

    - Made of marine-grade 316 stainless steel for durability and corrosion resistance
    - There are two wing nuts at each corner to fix the flagpole, which is strong in wind resistance
    - With a high degree of mirror polish, smooth touch, beautiful appearance
  • 316 Stainless Steel Marine Intake Strainer

    316 Stainless Steel Marine Intake Strainer

    Material: AISI 316 marine grade stainless steel
    Surface: Mirror polished
    Application: Ship, Yacht, Boat accessories, Marine hardware, Sailing accessories

    - Made of marine grade stainless steel, corrosion-resistant, rust-proof, built to last.
    - Fine grinding mirror polishing process for a scratch-free, burr-free finish.
    - Effectively filter water and prevent marine debris from entering the engine.
    - Made using the highest quality components, go through performance and quality tested.
  • Related Blog
  • Reviews

  • Anchor Chain Sizing

    Step 1 - Determine the length of your boat. The boat’s specification sheet, and sometimes the owner’s manual, will have your boat length listed. However, if you’re unsure of your boat length, measure the hull, from the tip of the bow to the center of the stern. Be certain to use a measuring tape that will not stretch, such as a steel tape. Also, do not include the bowsprit or any other fittings that may have been added to the hull.

  • Care & Maintenance of Stainless Steel

    For the preservation of stainless steel regular maintenance is strongly recommended. The following provides a guide to preserving stainless steel, grades 304 and 316. As for all surfaces, stainless steel requires cleaning to remove dirt and grime. The level of cleaning, maintenance and inspection required depends primarily on the environment. In some exterior instances, normal rain washing is sufficient. In more polluted or corrosive environments, particularly in coastal situations and swimming pools, the surfaces require regular washing to maintain their good looks. We recommend regular washing of stainless steel surfaces. Refer to the attached schedule.

  • Stainless Steel Marine Hardware Products Shipped to Shipyard Customers in Asia

    We are delighted to announce the successful completion of packaging and transportation of a new batch of stainless steel marine hardware products from our warehouse. These products have been carefully manufactured and are now en route to our shipyard customers in Asia.

  • Andy Marine Hot-dip Galvanized Bruce Anchors

    Andy Marine, the global leader in marine equipment, today launched a new marine hardware high quality, hot dip galvanized bruce anchor. With its exceptional grip, excellent corrosion resistance and innovative design, the anchor redefines the safety standard for marine anchoring and is the ultimate solution for commercial, yacht and recreational sailing users to navigate complex sea conditions.

  • The Portable Propane Gas Grill with Mount

    There is the option, and pure joy, of grilling on your boat. You’ll never cook with a better view! To keep things sailing smoothly, here are a few tips for cooking and eating well on your boat:

  • Elevate Your Boating Experience With Deck Plates and Access Hatches

    Deck Plate and Access Hatches are important accessories for boat enthusiasts. They come in various sizes and designs, offering versatility in their applications. Some may include hatches or covers that can be opened or closed, providing flexibility for different needs on the boat.

Send Inquiry

Hit enter to search or ESC to close
X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept